The Videowall module offers a general portfolio overview for monitors mounted on walls. Videowall displays the most up-to-date content and automatically adapts to the window size. You can customize the module to display the most relevant productive parameters, the weather conditions, and the accumulated tendency.
To access the Videowall module, click the icon on the Upper bar, then click the icon.
Figure 1. Videowall
Filter: click to filter plants by selecting a criterion and a value from the drop-down lists
Order by: click to sort panels by name or by peak power.
Auto-pagination: click to switch on or off:
On: the page scrolls automatically to display all the cards.
Off: you must scroll the page manually to display cards that do not fit in the window.
Cards: display each plant as a card, sorted alphabetically.
Videowall cards
The cards in the Videowall consist of three panels. Each panel provides general information about the plant, instant values, weather conditions, accumulated values, and the most relevant alarm for the plant.
Figure 2. Videowall card
Upper ribbon: displays the plant name, the peak power in kWp, and the number of installed solar trackers and inverters.
Real-time chart: monitors the evolution of two predefined parameters in real time. For the best graphic output, we recommend using parameters expressed as percentages
Weather: displays the current weather and the forecast for the following two days. Displays the current, minimum and maximum temperature, and the wind speed.
The information is displayed based on the plant coordinates and is retrieved from an external provider, so that you can compare third-party information with the data from the plant sensor.
Accumulated values: provides a quick summary of a KPI by comparing a budget value and a real value. Data is provided as a chart and as a value list
Lower ribbon: displays the most relevant alarm for the plant, if any.
icon on the Upper bar, then click the 
icon.